Gas requirement: Medical oxygen and nitrous oxide with a pressure
ranging from 280~600kpa
safety valve <12.5 kPa
Respiratory Rate 1~99 bpm
gas concentration output 21% ~ 100% adjustable
Maximum Minute ventilation ≥18L / min, permissible deviation: ±20 %
Breathing Mode A/C, SIPPV,IPPV,SIMV,PSIMV,CPAP,PCV, PEEP,SIGN,VCV,
SPONT, MANUAL
Ventilator compliance ≤30 Ml/kPa
PEEP: 0~1.0KPa
Ptr: ,-1.0~1.0 kPa
IMV frequency: 1 ~ 12 times/min, permissible deviation: ±15%.
I/E Ratio: 4:1~1:4
Tidal Volume range 0~2000ml
Inspiratory Plateau: 0~1s
Maximum Safety Pressure ≤ 6.0kPa
Sigh: one deep breath per 80 controlled respirations, the
inspiration time is 1.5 times of the setting point and the
permissible error is -10% or 15%.
Pressure limit range: 1.0~ 6.0kPa
Airway pressure alarm: Audible and visual and with yellow and red
color indicating upper alarm: 0.9 kPa ~ 5.4 kPa
lower: 0.5kPa
Ventilation Volume alarm: ≥ 18L/ MIN
Power Supply Alarm "Ac/dc power supply are after failing to send
out alarm immediately
Alarm Time: keep >120s"
The airway pressure continues to be higher than 15 hPa ±1 hPa for
15s±1s, then the machine will raise an audible alarm, the pressure
will be displayed in red and the continuous high pressure red alarm
wording is displayed on the screen of the anesthetic respirator.
| Ambient temperature | 10 ~ 40oC |
| Relative humidity | no higher than 80 % |
| Atmospheric pressure | 860 hPa ~ 1060 hPa |
| Power requirement | 100-120 Vac, 50/60 Hz; |
| Air source requirement | Medical oxygen and laughing gas with a rated pressure ranging from
0.3 to 0.5MPa. |
| Attention | the AC power supply used for the anesthesia machine must be well
grounded. |
| Attention | the anesthesia machine used must be equipped with a carbon dioxide
monitor complying with ISO 9918:1993, an oxygen monitor complying
with ISO 7767:1997 and an expiratory gas volume monitor complying
with 51.101.4.2 of Medical Electrical Equipment |
| Part II | Special Requirements for Safety and Basic Performance of Anesthesia
System. |
